Published: 2017-07-01   Views: 98
Author: yantramstudio
Published in: Creativity
Architectural Design Studio: 10 Essential Things To Know

Over the years, an architect’s tasks might not have changed much, but a modern architectural design studio is way different than its conventional counterpart. Few things, however, that have remain unchanged are the questions that young designers have. If not worked out properly, the familiar smell of paper and basswood can turn into a spell of despair. So it’s necessary to know few things that can help one survive as well as thrive into design studio.

Here is a list of ten essential things that expose some common queries associated with architectural design studio.

1. Pen the Details

Studios mean paper work and paper work means detailing. Keep track of your work and do make a habit of carrying a notepad.  Amidst all the sketching, you might forget to pay attention to some other work. Not all the time you are equipped with necessary tools for specifying your task. Your notepad shall help you to jot down things which you can attend to later. This habit also assists you in carefully editing anything that you’re about to publish.

 2. Time Management

Architecture students come under the lot who hardly work in a methodical manner. They are terrible at managing their time and the total output of their productivity is lost during this time management endeavor. There are some freshly graduated architects who brag about being all-nighters. But, the actual grown-ups of the industry know that all-nighters are not needed if you can manage your time efficiently. You already spend 8 hours of the day in the studio, and those hours are enough to get oodles of work done. So, time management is a must for those fresh architects.

3. No Last Minute Change

There is always that little more in designing, especially when you are in the learning phase. You will be tempted to present your concepts or make that model more presentable. This urge to make your designs better even at the last minute can turn out to be disastrous, especially when you are about to present your work to clients. Work carefully before you finalize everything. Once you are done with building models and rendering drawings, there is no looking back.

4. Be Author of Ideas

It’s good to be a good designer, but it’s great to be a design author. After all, no one likes to be known as the ‘blind follower’ in the studio, the one who only carries out instructions without any further contribution of his or her own. Don’t always stick to the status quo. Build your own ideas, design them, share them and get feedback. Undoubtedly, you will need to put some extra efforts, but compared to the hard work, the opportunities that your ideas may bring are also diverse.

5. Remember Your Clients, Always

What your clients think? What do they need? What can they afford? How can they afford? Once you have been assigned a designing task, your ideas should strictly work in accordance with the needs of your clients. They should be the only ones who should be at the back of your mind. You don’t need to overstress yourself with the minutest details, but, of course, they are the ones who should direct your work.

6. Don’t Stop Learning

Starting from Gothic styles to the comforts of a six year-old, an architect needs to know almost anything that can find even the slightest use in architecture. Designing is all about learning on the go. Fortunately, architects now have plenty of sources by their side to learn, design and implement new things. Read good designing blogs, participate in forums. Consider starting your own blog. In short, don’t ever stop learning.

7. Do Your Homework

It is next to impossible to know ins and outs about your clients’ businesses, but as a responsible designer, it is your duty to learn possibly as much as you can about their businesses. This learning is necessitated at the inception of a project as it helps you to know about your clients’ objectives, their spaces and of course, gives you a clearer view of their requirements. If required, dedicate a half-day session to shoot all queries that you have.

8. Break Few Rules

Most of us choose to go by the norms as they ensure safety and evade chaos. But, if need be, there is no harm in breaking a few rules. Remember, designing is all about ideas. While most of your execution will be directed from your college time, sometimes you need to bring up your own ideas and execute them in your own ways. If your hard work is able to garner complements and turn heads, then who cares what methods you inculcated?

9. Learn Through Criticism

A creative mind should be as open to criticism as it is to ideas. By all means, seek criticism. It not only helps you to assess your work, but also opens gateways to improvements. Designing is a genre where perfection comes by correcting your flaws, and if you don’t know your flaws, there is no question of correction. Connect with your mentors, show them your work, seek advice and of course, learn from criticism.

10. Appreciate Yourself

One must remember that seeking criticism doesn’t mean demeaning oneself. This is a common mistake which is made by most of the designers at their early careers. If you don’t value your work, no one will. You have put lots of efforts and sleepless nights in designing those models, so there’s nothing wrong in appreciating yourself.

Your design studio works as an excellent learning habitat where you will find yourself surrounded with experiences. Every day will teach you something new but, knowing the basic rules will at least help you to survive and overcome the initial struggles.

Contact YantramStudio.com for your architectural visualization design requirement!
Email: info@yantramstudio.com

Source by : http://yantramstudio.com/blog/architectural/architectural-design-studio-10-essential-things-to-know/

Author Bio

Yantram Architectural Design Studio, flourished out as a Global Brand in the world of Imagination and designing. Our Studio strongly represent our decade old arduous journey to become a top class renowned brand for 3D designing, an envy to every studio in the CGI world.

Yantram Architectural Studio founded in 2004, has completed 3D Animation design project for over 3000 Architect, Real State Firms, Interior Designer, Ad Agency, media - Marketing companies, Industrial Project, Character Modeling Studio.. etc..The goal of our firm is to facilitate the creation of delightful 3D Photorealistic Rendering Visualization with lasting value for the 3D Rendering & 3D Walkthrough Project that they serve

Services we offer at Yantram Studio:

3D Architectural Exterior Animation
3D Architectural Interior Animation
3D Walkthrough Animation
2D Floor Plan
3D Floor Plan Design
3D Character Modeling
Augmented Reality
Virtual Reality
3D Medical Animation
3D Product Modeling
360 Panoramic Virtual Tour
CAD Drafting Services
Animation Video Productions

For more visit us at http://www.yantramstudio.com/

Article Comments

0 comments.

There are zero comments yet, why not be the first?

You must be logged in to post a comment.

Please log in or register to comment or reply to a comment.

Articles Search

Featured Articles

Most Popular Articles

Latest Forum Threads

Views viewed 173 times
Views viewed 270 times
Views viewed 110 times
Views viewed 361 times
Views viewed 1856 times