Page 1 of 2 Pages  
Articles Per Page  

Views:  3

Published:  2019-02-01 

Author:  jpinstruments

Published In:  Science

For technicians about to install the JPI EDM 740 in an aircraft, this article is for you. It covers all the general points to installing the JPI EDM 740. To start with, only FAA certified aircraft mechanic should attempt to install the EDM 740 in aircraft. . . . .

 

Use the following link to read the full article ~ Installation Of EDM-740 In Aircraft

Views:  3

Published:  2019-01-24 

Author:  jpinstruments

Published In:  Consumer Electronics

Combustion whether in aircraft or cars or anything that has an engine, not only relies on accurate mixture of air with fuel before ignition, it also requires the air and fuel to be at optimal temperature - this ensures instant and clean combustion. Aircraft typically fly at altitudes . . . .

 

Use the following link to read the full article ~ IAT Probes In Aircraft And How It Works

Views:  3

Published:  2019-01-16 

Author:  jpinstruments

Published In:  Small Business

Even the Wright brothers plane had a couple of dials near their seat in the plane. If nothing else, they at least had to know how much fuel they had in the fuel tanks. Without the presence of a working dial or two, as . . . .

 

Use the following link to read the full article ~ Benefits Of Aircraft Engine Monitors

Views:  7

Published:  2018-12-28 

Author:  jpinstruments

Published In:  Business

Here are the top 10 tips on installation of a Turbine Inlet Temperature (TIT) probe in your aircraft: 1. Before you even open the package containing the TIT probe, you need to do a little planning i.e. determine the exact location of hole for placing the . . . .

 

Use the following link to read the full article ~ Top 10 Tips On Installation Of TIT Probe In An Aircraft

Views:  3

Published:  2018-12-19 

Author:  jpinstruments

Published In:  Science

The aircraft Engine Data Manager 350 (EDM 350), by J.P. Instruments is a small box-like device with an LCD screen on the front and it keeps track of the vital functions of the aircraft engine.  The faceplate requires just 3.25 square inches of . . . .

 

Use the following link to read the full article ~ EDM 350 System And How It Works ?

Views:  100

Published:  2018-12-12 

Author:  jpinstruments

Published In:  Business

The CHT Bayonet probes are the threaded probes and are commonly known as ‘CHT Bayonet Probes’. These are typically used on Lycoming engines in aircraft. Let us start with extending the CHT probes - most CHT probes available in the market feature cold-junction compensation. Cold-junction compensation . . . .

 

Use the following link to read the full article ~ Installation Of CHT Bayonet Probe In Aircraft

Views:  33

Published:  2018-12-04 

Author:  jpinstruments

Published In:  Business

Features & Specifications of EDM 800 include: •    Easy front panel programming by the pilots •    24 Pilot programmable alarm limits via front panel •    No more calculating - displays both leaned temperatures below peak and peak . . . .

 

Use the following link to read the full article ~ Standard Features & Specifications Of EDM 800 System

Views:  72

Published:  2018-11-26 

Author:  jpinstruments

Published In:  Science

I once had this dream actually, a nightmare - I was flying my Cessna 152 over Florida Keys enjoying both the flight and the views when all of a sudden, I saw there were no engine monitors or gauges in the cockpit. My panic was so . . . .

 

Use the following link to read the full article ~ Aircraft Engine Monitor Keeps Your Engine Healthy, Efficient And Safe

Views:  73

Published:  2018-11-15 

Author:  jpinstruments

Published In:  Science

For the uninitiated, the gas turbine you see in the single and twin-engine aircraft is an internal combustion engine that uses air to drive the engine and propeller, which in turn, propels the airplane. It achieves this with the help of heat energy from . . . .

 

Use the following link to read the full article ~ Compressor Discharge Temperature (CDT) Probe - How It Works In Aircraft?

Views:  45

Published:  2018-11-05 

Author:  jpinstruments

Published In:  Science

A single or twin-engine aircraft cockpit jampacked with gauges of different types and sizes might look awesome or look like a spaceship to passenger or friend you are trying to impress but for the pilot – they are a pain to keep track of during . . . .

 

Use the following link to read the full article ~ Slim-line Gauges - Their Usefulness In Aircraft

Views:  66

Published:  2018-09-26 

Author:  jpinstruments

Published In:  Advertising

The J.P. Instrument manufactured Classic Scanner is perfect for any plane.  The Classic scanner is a small convenient package with an even more convenient price tag.  The Classic Scanner has been in the market for over 20 years, and its reliance and durability is . . . .

 

Use the following link to read the full article ~ Classic EGT And CHT Scanner - How Does It Work In Aircraft?

Views:  112

Published:  2018-09-18 

Author:  jpinstruments

Published In:  Advertising

The EDM 800 puts the fun back into flying because as a pilot, you don’t have to spend bulk of the flight time staring at a bunch of dials to ensure the aircraft engine is functioning normally; the EDM 800 does this task for you. Using . . . .

 

Use the following link to read the full article ~ What Are The Specifications & Features Of EDM 800 In Aircraft?

Views:  81

Published:  2018-09-11 

Author:  jpinstruments

Published In:  Advertising

Data from the OAT probe on aircraft can be used in several calculation such as flight planning, aircraft take-off performance, cruise performance, density altitude and so forth. In modern day aircraft, external air temp obtained via the Outside Air Temperature (OAT) probe, for the basic input . . . .

 

Use the following link to read the full article ~ Features & Applications Of Outside Air Temperature (OAT) Probe

Views:  163

Published:  2018-08-30 

Author:  jpinstruments

Published In:  Business

Having acquired the Aircraft Engine Data Management System 700 (EDM 700), it goes without saying, that this awesome piece of equipment needs to be carefully handled and installed. While the JPI warranty at the back of the instruction manual clearly states that JPI will replace defective parts . . . .

 

Use the following link to read the full article ~ Installation Of Engine Data Management 700 (EDM 700) System In Aircraft

Views:  102

Published:  2018-08-22 

Author:  jpinstruments

Published In:  Business

The Carburettor Temperature Probe (CRB) is used to detect temperature drop in the carburettor. For successful ignition to occur, the air-fuel mixture has to be perfect and this can only happen at the right temperature. Now when fuel and air is mixed, the temperature inside the . . . .

 

Use the following link to read the full article ~ What Are The Key Features Of CRB Probe?

Views:  92

Published:  2018-08-13 

Author:  jpinstruments

Published In:  Business

The best EDM that money can buy in under ten thousand dollars (U.S) for 4 or 6-cylinder aircraft engine with transducers and all? The answer has to be EDM 790 manufactured by J.P. Instruments, U.S.A. It’s not just an advert claim . . . .

 

Use the following link to read the full article ~ Optimization And Characterization Of EDM 790 System

Views:  86

Published:  2018-08-03 

Author:  jpinstruments

Published In:  Advertising

There was a time when portable watches used to be two inches in diameter and as much as three-quarters of an inch thick. These watches were kept in the pocket and taken out only when you needed to know the time. We all know how these . . . .

 

Use the following link to read the full article ~ How Slim-line Tach Gauges Works In Aircraft?

Views:  96

Published:  2018-07-26 

Author:  jpinstruments

Published In:  Business

The engine data monitoring system (EDM) 960 – the one manufactured by J.P. Instruments is available for all aircraft with 4, 6, 7, 8 or 9 cylinders engines. There are so many things in an aircraft that need to be monitored that in days gone by, there used to . . . .

 

Use the following link to read the full article ~ Characteristics And Operation Of EDM-960 System In Aircraft

Views:  98

Published:  2018-07-18 

Author:  jpinstruments

Published In:  Advertising

For this article, we’ve selected to explain the working principles of the RPM standard sensor for the pressurized Bendix series (manufactured by Teledyne Continental Motors): The RPM sensor is connected to the magneto. To understand the sensor let us first begin with the “why” of things . . . .

 

Use the following link to read the full article ~ Working Principles Of RPM Sensors In Aircraft

Views:  105

Published:  2018-07-10 

Author:  jpinstruments

Published In:  Advertising

Back in the days of WWII, aircraft cockpits had few dials (gauges) and each was connected to any individual part of the aircraft engine. As aeroplane design improved so did the number of gauges in the aircraft cockpit. Overtime, the aircraft cockpit got so crowded with gauges . . . .

 

Use the following link to read the full article ~ How Slim Line Gauges Works In Aircraft?

Views:  98

Published:  2018-07-02 

Author:  jpinstruments

Published In:  Advertising

Just so there is no confusion, the RPM sensors we refer to, are the ones used for measuring the RPM of the Bendix Magneto or the Slick Magnetos in aircraft. Some aircraft use Dual Magnetos but Bendix Magnetos and the Slick Magnetos are more widely used. One . . . .

 

Use the following link to read the full article ~ Installation Of RPM Sensor For Bendix Mag In Aircraft

Views:  96

Published:  2018-06-25 

Author:  jpinstruments

Published In:  Advertising

For the uninitiated, an oil temperature probe is required keep a check on the oil temperature. The oil temperature is vital to maintain its viscosity. A low temperature will make the oil useless whereas a higher than normal temperature will risk a whole lot more than just engine damage . . . .

 

Use the following link to read the full article ~ Working & Features Of Oil Temp Probe In Aircraft

Views:  200

Published:  2018-06-15 

Author:  jpinstruments

Published In:  Advertising

Called by various names including EDM (Engine Data Monitor), ECM (Engine Condition Monitoring) etc. these are essentially aircraft engine monitoring systems. These electronic monitoring cum display units are at heart, a very simple device and this article aims to explain in simple language, how these devices work. . . . .

 

Use the following link to read the full article ~ Aircraft Engine Monitoring Systems How It Work

Views:  112

Published:  2018-06-14 

Author:  jpinstruments

Published In:  Marketing

Called by various names including EDM (Engine Data Monitor), ECM (Engine Condition Monitoring) etc. these are essentially aircraft engine monitoring systems. These electronic monitoring cum display units are at heart, a very simple device and this article aims to explain in simple language, how these devices work. . . . .

 

Use the following link to read the full article ~ Aircraft Engine Monitoring Systems - How It Works

Views:  154

Published:  2018-06-11 

Author:  jpinstruments

Published In:  Advertising

We present a comparison between EDM 730 and EDM 760 – both Engine Data Monitors are manufactured by JP Instruments; World leader in onboard flight instruments and aircraft engine data management systems. JP Instrument’s aircraft engine data monitors provide the pilots with real time information for aircraft . . . .

 

Use the following link to read the full article ~ Engine Data Monitor 730 System Vs 760 System