As mentioned, if looking up ‘engraving near me’ or ‘engraving services near me,’ One to One Engravers is what you end up helping you engrave any products.
Engraving soft products isn’t the easiest thing to do, and if you’ve tried to mark materials with a diode-pumped, fibre or CO2 laser marking machine, the poor mark quality would be clear. Such lasers have longer wavelengths which is why they would not react well with materials that are more sensitive.
As said before, shorter wavelength lasers are needed for precise marking, but that results in speed being decreased. Based on this, we need to talk about green marking lasers and UV laser marking machines. These technologies are used for soft products.
UV lasers are needed on the micro level for precise and intricate marks as the wavelengths allow minuscule spot size and high beam intensity. Both of them emit less energy than infrared lasers, but the one you need is the green laser.
It is clear that less power is needed for readable marks that are clean. A typical fibre laser has a 1064 nm wavelength, but green lasers have 532 nm. UV lasers, on the other hand, have even less power that is about 355 nm.
This means that a green laser is giving you more power when compared to a UV laser while still being delicate enough to engrave on many soft products. This means that you don’t have to decrease the marking speed significantly but still get a high-quality mark. It’s not too slow or too rough but is perfect for soft products.
In this article, we will look at how soft products are engraved by businesses that offer such services. If you’re in Northampton, UK, and are here after having Googled ‘engraving near me’ or ‘engraving services near me,’ then we recommend One to One Engravers for the excellent work that they do. They don’t just work with soft products but a wide variety of materials like metals and others with great expertise, so no client gets disappointed by the work